Paso 1:
Utilizas al Serial Monitor para depurar bocetos del Software de Arduino o para visualizar los datos enviados por un bosquejo de trabajo. Debe tener un Arduino conectado por USB al ordenador para poder activar al Monitor serie.
Para familiarizarse con el uso del Monitor Serial, copie y pegue el siguiente ejemplo de bosquejo en una ventana de IE de Arduino en blanco. Luego comprobarlo y si está bien, súbela. El siguiente paso le mostrará lo que puede esperar.
SKETCH de ejemplo: Cortar y pegar
/* YourDuinoStarter_SerialMonitor_SEND_RCVE<br> - WHAT IT DOES: - Receives characters from Serial Monitor - Displays received character as Decimal, Hexadecimal and Character - Controls pin 13 LED from Keyboard - SEE the comments after "//" on each line below - CONNECTIONS: - None: Pin 13 built-in LED - - V1.00 02/11/13 Questions: terry */ /*-----( Import needed libraries )-----*/ /*-----( Declare Constants and Pin Numbers )-----*/ #define led 13 // built-in LED /*-----( Declare objects )-----*/ /*-----( Declare Variables )-----*/ int ByteReceived; void setup() /****** SETUP: RUNS ONCE ******/ { Serial.begin(9600); Serial.println("--- Start Serial Monitor SEND_RCVE ---"); Serial.println(" Type in Box above, . "); Serial.println("(Decimal)(Hex)(Character)"); Serial.println(); } //--(end setup )--- void loop() /****** LOOP: RUNS CONSTANTLY ******/ { if (Serial.available() > 0) { ByteReceived = Serial.read(); Serial.print(ByteReceived); Serial.print(" "); Serial.print(ByteReceived, HEX); Serial.print(" "); Serial.print(char(ByteReceived)); if(ByteReceived == '1') // Single Quote! This is a character. { digitalWrite(led,HIGH); Serial.print(" LED ON "); } if(ByteReceived == '0') { digitalWrite(led,LOW); Serial.print(" LED OFF"); } Serial.println(); // End the line // END Serial Available } } //--(end main loop )--- /*-----( Declare User-written Functions )-----*/ /*********( THE END )***********/
